둘러보기 메뉴
검색
바뀐글
임의글
개인 도구
가입하기
로그인
도움말
도움말
질문게시판
자주 묻는 질문
커뮤니티
실시간 채팅방
가입인사게시판
자유게시판
뉴스게시판
제재안게시판
최근 토론
페미위키
공지사항
개선 요청
바뀐글
임의글
파일 올리기
다면 분류 목록
특수 문서 목록
모듈:Convert/text 문서 원본 보기
이름공간
모듈
토론
주시
도구
여기를 가리키는 문서
가리키는 글의 최근 바뀜
문서 정보
위키베이스 항목
행위
보기
읽기
원본 보기
역사 보기
←
모듈:Convert/text
문서 편집 권한이 없습니다. 다음 이유를 확인해주세요.
요청한 명령은 다음 중 하나의 권한을 가진 사용자에게 제한됩니다:
사용자
,
Seeders
.
문서를 고치려면 이메일 인증 절차가 필요합니다.
사용자 환경 설정
에서 이메일 주소를 입력하고 이메일 주소 인증을 해주시기 바랍니다.
문서의 원본을 보거나 복사할 수 있습니다.
-- 한국어 위키백과(ko.wikipedia.org)의 모듈:Convert에서 사용되는 텍스트 -- This is a separate module to simplify translation for use on another wiki. -- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki. local translation_table = { omit_scale_sep = true, perunit_before_val = 2, currency_per_word = '당', per_word = '매', plural_suffix = '', specials = { utype = { -- ["로컬 언어 유닛 종류"] = "이_스크립트에_사용된_이름" ["연비"] = "type_fuel_efficiency", ["길이"] = "type_length", ["온도"] = "type_temperature", ["부피"] = "type_volume", ["fuel efficiency"] = "type_fuel_efficiency", ["length"] = "type_length", ["temperature"] = "type_temperature", ["volume"] = "type_volume", }, ucode = { exception = { -- ["로컬 언어 유닛 코드"] = "모듈_convert에_사용된_이름" ["ft"] = "integer_more_precision", ["in"] = "subunit_more_precision", ["lb"] = "integer_more_precision", }, istemperature = { -- Common temperature scales (not keVT or MK). -- ["unit code in local language"] = 1 ["C"] = true, ["F"] = true, ["K"] = true, ["R"] = true, }, usesymbol = { -- Use unit symbol not name if abbr not specified. -- ["unit code in local language"] = 1 ["C"] = 1, ["F"] = 1, ["K"] = 1, ["R"] = 1, ["C-change"] = 1, ["F-change"] = 1, ["K-change"] = 1, }, alttype = { -- Unit has an alternate type that is a valid conversion. -- ["unit code in local language"] = "alternate type in local language" ["Nm"] = "energy", ["ftlb"] = "torque", ["ftlb-f"] = "torque", ["ftlbf"] = "torque", ["inlb"] = "torque", ["inlb-f"] = "torque", ["inlbf"] = "torque", ["inoz-f"] = "torque", ["inozf"] = "torque", }, }, }, mtext = { section_names = { -- name_used_in_this_script = 'Section title used in conversion data' overrides = '재정의할 단위 코드 (Overrides)', conversions = '환산표 (Conversions)', outmultiples = '복합 출력 단위 (Output multiples)', combinations = '단위 조합 (Combinations)', inmultiples = '복합 입력 단위 (Input multiples)', defaults = '기본 변환 단위 (Defaults)', links = '링크 (Links)', perunits = 'Automatic per units', varnames = '변수명 (Variable names)', }, titles = { -- name_used_in_this_script = 'Title of page' conversion_data = '모듈:Convert/설명문서/환산 데이터', }, messages = { -- name_used_in_this_script = 'Error message ($1 = first parameter, $2 = second)' m_als_bad = '"$1" 별칭에 잘못된 문자열이 있습니다.', m_als_dup = '"$1" 별칭은 이미 정의되어 있습니다.', m_als_link = 'Alias "$1" must include a wikilink ("[[...]]") in the symlink text.', m_als_mul = 'Alias "$1" has multiplier "$2" which is not a number.', m_als_same = '"$2" 별칭 코드에 같이 기재된 "$1"의 내용이 본래 단위와 동일합니다. "$2"의 내용에서 해당 기재사항을 제거해주세요.', m_als_type = 'Target of alias "$1" has wrong type.', m_als_undef = '"=$1" 별칭을 쓰려면 본래 단위가 별칭보다 앞서 정의되었어야 합니다. 본래 단위가 정의된 이후에 해당 별칭을 정의해주세요.', m_cmb_miss = 'Missing unit code for a combination.', m_cmb_none = 'No units specified for combination "$1"', m_cmb_one = 'Only one unit specified for combination "$1"', m_cmb_type = 'Unit "$1" in combination "$2" has wrong type.', m_cmb_undef = 'Unit "$1" in combination "$2" not defined.', m_cmp_def = 'Composite "$1" must specify a default unit code.', m_cmp_int = 'Composite "$1" has components where scale ratios are not integers.', m_cmp_inval = 'Composite "$1" has a component with an invalid scale, "$2".', m_cmp_many = 'Composite "$1" has too many fields.', m_cmp_miss = 'Missing unit code for a composite.', m_cmp_order = 'Composite "$1" has components in wrong order or with invalid scales.', m_cmp_scale = 'Alternate unit "$1" in composite "$2" has wrong scale.', m_cmp_two = 'Composite "$1" must specify exactly two unit codes.', m_cmp_type = 'Unit "$1" in composite "$2" has wrong type.', m_cmp_undef = 'Unit "$1" in composite "$2" not defined.', m_def_cond = 'Invalid condition in default "$1" for unit "$2".', m_def_fmt = 'Default output "$1" for unit "$2" should have 2 or 3 "!".', m_def_rpt = 'Default output "$1" for unit "$2" is repeated.', m_def_same = 'Default output for unit "$1" is the same unit.', m_def_type = 'Default output "$1" for unit "$2" has wrong type.', m_def_undef = '"$2"의 기본 변환 단위로 기재된 "$1" 단위 코드를 환산표에서 찾을 수 없었습니다. "$1" 단위가 제대로 정의된 것인지, 단위 코드를 오타낸 것이 아닌지 확인해주세요.', m_dfs_code = 'Defaults section: no unit code specified.', m_dfs_dup = 'Defaults section: unit "$1" has already been specified.', m_dfs_none = 'Defaults section: unit "$1" has no default specified.', m_dfs_sym = 'Defaults section: unit "$1" must have a symbol.', m_dfs_two = 'Defaults section: unit "$1" should have two fields only.', m_dfs_undef = 'Defaults section: unit "$1" is not defined.', m_dup_code = 'Unit code "$1" has already been defined.', m_error = '오류:', m_ftl_read = '"[[$1]]" 문서에서 위키문법을 읽지 못했습니다. 해당 문서가 정말로 존재하는지, 존재한다면 문서명에 오타가 있는지 확인하세요.', m_ftl_table = '[[$1]] should export table "$2".', m_ftl_type = 'Fatal error: unknown data type for "$1"', m_hdg_lev2 = '"$1" 단락의 시작 부분에 위치해야 할 2단계 제목(== $1 ==)을 찾을 수 없었습니다. 문서에 옆의 제목을 넣어주세요.', m_hdg_lev3 = '$1 앞에 3단계 제목(===)이 없습니다.', m_line_num = ' ($1번째 줄).', m_lnk_brack = 'Link "$1" has wrong number of brackets.', m_lnk_dup = 'Link exception "$1" is already defined.', m_lnk_miss = 'Missing unit code for a link.', m_lnk_none = 'No link defined for unit "$1".', m_lnk_sym = 'Unit code "$1" for a link must have a symbol.', m_lnk_two = 'Row for unit "$1" link should have two fields only.', m_lnk_type = 'Link exception "$1" has wrong type.', m_lnk_undef = 'Unit code "$1" for a link is not defined.', m_miss_code = 'Missing unit code.', m_miss_sym = 'Missing symbol.', m_miss_type = 'Missing unit type.', m_mul_int = 'Multiple "$1" has components where scale ratios are not integers.', m_mul_miss = 'Missing unit code for a multiple.', m_mul_none = 'No units specified for multiple "$1"', m_mul_one = 'Only one unit specified for multiple "$1"', m_mul_order = 'Multiple "$1" has components in wrong order or with invalid scales.', m_mul_scale = 'Multiple "$1" has a component with an invalid scale, "$2".', m_mul_std = 'Unit "$1" in multiple "$2" must be a standard unit.', m_mul_type = 'Unit "$1" in multiple "$2" has wrong type.', m_mul_undef = 'Unit "$1" in multiple "$2" not defined.', m_no_title = 'Need title of page with unit definitions.', m_ovr_dup = 'Override "$1" is already defined.', m_ovr_miss = 'Missing unit code for an override.', m_per_dup = 'Per unit "$1" already defined.', m_per_empty = 'Unit "$1" has an empty field in the "per".', m_per_fuel = 'Unit "$1" has invalid unit types for fuel efficiency.', m_per_inv = 'Invalid field for a "per".', m_per_two = 'Unit "$1" does not have exactly 2 fields in the "per".', m_per_undef = 'Unit "$1" has undefined unit code "$2" in the "per".', m_percent_s = 'Field "$1" must not contain "%s".', m_pfx_bad = 'Unknown prefix: "$1".', m_pfx_name = 'Unit with Prefix set must include Name.', m_scl_bad = 'Scale expression is invalid: "$1".', m_scl_miss = 'Missing scale.', m_scl_oflow = 'Scale expression gives an invalid value: "$1".', m_var_cnt = 'Variable names section: each row must have five fields.', m_var_dup = 'Unit "$1" already has a variable name.', m_var_miss = 'Missing field for a variable name.', m_var_undef = 'Unit "$1" in variable names is not defined.', m_warning = '경고:', m_wrn_more = ' (이외에도 내용이 더 있지만 생략함)', m_wrn_nbsp = 'Line $1 contains a nonbreaking space.', m_wrn_nodef = 'Units with the following unit codes have no default output.', m_wrn_ucode = ' $1', }, }, } -- 몇몇 단위들은 킬로그램의 "kg"처럼 단위 코드를 사용하기 전에 SI 접두사가 붙습니다. local SIprefixes = { -- The prefix field is what the prefix should be, if different from the prefix used. ['Y'] = { exponent = 24, name = '요타', }, ['Z'] = { exponent = 21, name = '제타', }, ['E'] = { exponent = 18, name = '엑사' , }, ['P'] = { exponent = 15, name = '페타' , }, ['T'] = { exponent = 12, name = '테라' , }, ['G'] = { exponent = 9, name = '기가' , }, ['M'] = { exponent = 6, name = '메가' , }, ['k'] = { exponent = 3, name = '킬로' , }, ['h'] = { exponent = 2, name = '헥토', }, ['da']= { exponent = 1, name = '데카', }, ['d'] = { exponent = -1, name = '데시' , }, ['c'] = { exponent = -2, name = '센티', }, ['m'] = { exponent = -3, name = '밀리', }, ['μ'] = { exponent = -6, name = '마이크로', prefix = 'µ' }, -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC ['µ'] = { exponent = -6, name = '마이크로', }, -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5 ['u'] = { exponent = -6, name = '마이크로', prefix = 'µ' }, -- not an SI prefix, but allow for people typing this ['n'] = { exponent = -9, name = '나노' , }, ['p'] = { exponent =-12, name = '피코' , }, ['f'] = { exponent =-15, name = '펨토', }, ['a'] = { exponent =-18, name = '아토' , }, ['z'] = { exponent =-21, name = '젭토', }, ['y'] = { exponent =-24, name = '욕토', }, } -- Some units can be qualified with one of the following prefixes, when linked. local customary_units = { -- !! LOCALIZED !! { "미국", link = "미국 단위계" }, -- 1 { "US", link = "미국 단위계" }, -- 2 { "U.S.", link = "미국 단위계" }, -- 3 { "영국", link = "야드파운드법" }, -- 4 { "imp", link = "야드파운드법" }, -- 5 } -- Names when using engineering notation (a prefix of "eN" where N is a number; example "e6km"). -- key = { "name", link = "article title", exponent = numeric_key_value } -- If lk=on and link is defined, the name of the number will appear as a link. local eng_scales = { ["3"] = { "천", exponent = 3 }, ["4"] = { "만", exponent = 4 }, ["6"] = { "백만", exponent = 6 }, ["8"] = { "억", exponent = 8 }, ["9"] = { "십억", link = "1000000000", exponent = 9 }, ["12"] = { "조", link = "1000000000000", exponent = 12 }, ["15"] = { "천조", link = "1000000000000000", exponent = 15 }, ["16"] = { "경", link = "10000000000000000", exponent = 16 }, ["20"] = { "해", link = "100000000000000000000", exponent = 20 }, ["24"] = { "자", link = "1000000000000000000000000", exponent = 24 }, } -- One of the following categories is included in the text of each message. local all_categories = { unit = "[[분류:단위 변환 시 올바르지 않은 단위를 사용한 문서]]", option = "[[분류:단위 변환 시 올바르지 않은 옵션을 사용한 문서]]", } -- For some error messages, the following puts the wanted style around -- each unit code marked like '...%{ft%}...'. local unitcode_regex = '%%([{}])' local unitcode_replace = { ['{'] = '"', ['}'] = '"' } -- no longer need the more elaborate substitute used before 2013-09-28 -- All messages that may be displayed if a problem occurs. local all_messages = { -- Message format string, %s parameters: anchor, title, text, category. -- Each displayed message starts with "Convert:" so can easily locate by searching article. cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[:en:Help:Convert messages#%s|<span title="단위 변환: %s">단위 변환: %s</span>]]</i>]</sup>%s', cvt_format2 = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[[:en:Help:Convert messages#%s|<span title="단위 변환: %s">%s</span>]]</sup>%s', -- Each of following messages is a table: -- { [1] = 'title', -- mouseover title text -- [2] = 'text', -- link text displayed in article -- [3] = 'category key', -- key to lookup category in all_categories -- [4] = 'anchor', -- anchor for link to relevant section on help page -- regex = gsub_regex, -- replace = gsub_table, -- } Mouseover title text Link text CatKey Anchor cvt_bad_num = { '"%s" 값은 반드시 숫자여야 합니다' , '올바르지 않은 숫자' , 'option', '올바르지_않은_숫자' }, cvt_big_prec = { 'Precision "%s" is too large' , 'precision too large' , 'option', 'precision_too_large' }, cvt_invalid_num = { '숫자가 너무 커서 한계 범위를 넘어갔습니다' , '한계범위를 넘은 숫자', 'option', '한계범위를_넘은_숫자' }, cvt_no_num = { 'Needs the number to be converted' , 'needs a number' , 'option', 'needs_number' }, cvt_no_num2 = { 'Needs another number for a range' , 'needs another number', 'option', 'needs_another_number' }, cvt_bad_frac = { 'frac "%s" must be an integer above 1' , 'invalid fraction' , 'option', 'invalid_fraction' }, cvt_bad_prec = { 'Precision "%s" must be an integer' , 'invalid precision' , 'option', 'invalid_precision' }, cvt_bad_sigfig = { 'sigfig "%s" must be a positive integer' , 'invalid sigfig' , 'option', 'invalid_sigfig' }, cvt_empty_option = { '비어있던 "%s" 옵션이 있어 무시했습니다' , '빈 옵션' , 'option', '빈_옵션' }, cvt_deprecated = { '"%s" 옵션은 폐지될 예정입니다.' , '*' , 'option', '폐지될_옵션', format = 'cvt_format2' }, cvt_no_spell = { 'Spelling is not available' ,'버그네요, 제보해주세요','option', '도움_요청하기' }, cvt_unknown_option = { '올바르지 않은 "%s" 옵션이 있어 무시했습니다', '올바르지 않은 옵션' , 'option', '올바르지_않은_옵션' }, cvt_bad_default = { '"%s" 단위가 올바르지 않은 기본 변환 단위를 가지고 있습니다', '버그네요, 제보해주세요', 'unit', '도움_요청하기'}, cvt_bad_unit = { 'Unit "%s" is invalid here' , 'unit invalid here' , 'unit' , 'unit_invalid_here' }, cvt_no_default = { '"%s" 단위에 기본 변환 단위가 없습니다' ,'버그네요, 제보해주세요','unit' , '도움_요청하기' }, cvt_no_unit = { 'Needs name of unit' , 'needs unit name' , 'unit' , 'needs_unit_name' }, cvt_unknown = { '"%s" 단위는 모르는 단위입니다' , '모르는 단위' , 'unit' , '모르는_단위' }, cvt_should_be = { '%s' , '모호한 단위' , 'unit' , '모호한_단위', regex = unitcode_regex, replace = unitcode_replace }, cvt_mismatch = { '"%s" 종류의 단위를 "%s" 종류의 단위로 바꿀 수 없습니다', '변환할 수 없는 단위 종류로 변환 시도', 'unit', '변환할_수_없는_단위_종류로_변환_시도'}, cvt_bug_convert = { '버그: Cannot convert between specified units','버그네요, 제보해주세요','unit' , '도움_요청하기' }, cvt_lookup = { '"%s" 단위가 부정확하게 정의되었습니다' ,'버그네요, 제보해주세요','unit' , '도움_요청하기' }, } -- Text to join input value/unit with output value/unit. local disp_joins = { -- [1]=출력 값 앞, [2]=출력 값 뒤, [3]=조합 단위 출력 값 사이; 기본값은"; " -- [wantname] gives default abbr=off ["or"] = { " or " , "" , " or ", wantname = true }, ["sqbr-sp"] = { " [" , "]" }, ["sqbr-nbsp"] = { " [" , "]" }, ["comma"] = { ", " , "" , ", " }, ["콤마"] = { ", " , "" , ", " }, ["쉼표"] = { ", " , "" , ", " }, ["반점"] = { ", " , "" , ", " }, ["slash-sp"] = { " / " , "" , wantname = true }, ["slash-nbsp"] = { " / ", "" , wantname = true }, ["slash-nosp"] = { "/" , "" , wantname = true }, ["b"] = { " (" , ")" }, ["(or)"] = { " (" , ")", " or " }, ["br"] = { "<br />" , "" , wantname = true }, ["br()"] = { "<br />(" , ")", wantname = true }, } -- Text to separate values in a range. local range_types = { -- Specifying a table requires either: -- * "off" and "on" values (for "abbr=off" and "abbr=on"), or -- * "input" and "output" values (for LHS and RHS); -- other fields are optional. -- When "adj=on|abbr=off" applies, spaces in range text are replaced with hyphens. -- With "exception = true", that also occurs with "adj=on|abbr=on". -- If "adj" is defined here, that text (unchanged) is used with "adj=on". ["+"] = " + ", [","] = ", ", [", and"] = ", and ", [", 그리고"] = ", 그리고", ["와"] = "와 ", ["과"] = "과 ", [", or"] = ", or ", [", 또는"] = ", 또는 ", ["by"] = " by ", ["-"] = "–", ["~"] = " ~ ", ["to about"] = " to about", ["and"] = { off = " and ", on = " and ", exception = true }, ["그리고"] = { off = " 그리고 ", on = " 그리고 ", exception = true }, ["과"] = { off = "과 ", on = "과 ", exception = true }, ["와"] = { off = "와 ", on = "와 ", exception = true }, ["and(-)"] = { input = " and ", output = "–" }, ["그리고(~)"] = { input = " 그리고 ", output = "~" }, ["그리고(-)"] = { input = " 그리고 ", output = "-" }, ["과(~)"] = { input = "과 ", output = " ~ " }, ["과(-)"] = { input = "과 ", output = "-" }, ["와(~)"] = { input = "와 ", output = " ~ " }, ["와(-)"] = { input = "와 ", output = "-" }, ["or"] = { off = " or " , on = " or " , exception = true }, ["또는"] = { off = " 또는 ", on = " 또는 ", exception = true}, ["to"] = { off = " to " , on = " to " , exception = true }, ["to(-)"] = { input = " to ", output = "–" }, ["+/-"] = { off = " ± ", on = " ± ", adj = " ± ", is_range_change = true }, ["by(x)"] = { input = " by ", output = " × ", out_range_x = true }, ["x"] = { off = " by ", on = " × ", abbr_range_x = true }, ["X"] = { off = " by ", on = " × " }, -- TEMPORARY and undocumented option for experiments to compare with new abbr_range_x ["xx"] = " × ", ["*"] = "×", -- use "*" to replace "x" in {{convert/2}} which is different from "x" in old {{convert}} } local range_aliases = { -- ["alternative name for a range"] = "standard range name" ["&"] = "그리고", ["–"] = "-", ["~"] = " ~ ", ["–"] = "-", ["to-"] = "to(-)", ["×"] = "x", ["×"] = "x", ["곱"] = "x", ["±"] = "+/-", ["플마"] = "+/-", ["±"] = "+/-", } -- Convert accepts range text delimited with whitespace, for example, {{convert|1 to 2|ft}}. -- In addition, the following "words" are accepted without spaces, for example, {{convert|1-2|ft}}. -- Words must be in correct order for searching, for example, 'x' after 'xx'. local range_words = { '-', '–', 'xx', 'x', '*' } local ranges = { types = range_types, aliases = range_aliases, words = range_words, } -- Valid option names. local en_option_name = { -- ["local text for option name"] = "en name used in this module" ["$"] = "$", ["abbr"] = "abbr", ["adj"] = "adj", ["comma"] = "comma", ["디버그"] = "debug", ["debug"] = "debug", ["disp"] = "disp", ["frac"] = "frac", ["lang"] = "lang", ["링크"] = "lk", ["lk"] = "lk", ["near"] = "near", ["order"] = "order", ["round"] = "round", ["sigfig"] = "sigfig", ["sing"] = "adj", -- "sing" is an old alias for "adj" ["sortable"] = "sortable", ["sp"] = "sp", ["spell"] = "spell", ["stylein"] = "stylein", ["styleout"] = "styleout", } -- Valid option values. -- Convention: parms.opt_xxx refers to an option that is set here -- (not intended to be set by the template which invokes this module). -- Example: At en.wiki, "abbr" includes: -- ["comma"] = "opt_nocomma" -- As a result, if the template uses abbr=comma, this script sets: -- parms["opt_nocomma"] = true -- parms["abbr"] = nil -- Therefore parms.abbr will be nil, or will have one of the listed values -- that do not start with "opt_". -- An option value of form "xxx?" is the same as "xxx" but shows the input as deprecated. local en_option_value = { -- $=x is handled as a special case: x should be a currency symbol that will be used instead of "$" ["abbr"] = { -- ["local text for option value"] = "en value used in this module" ["comma"] = "opt_nocomma?", -- no numsep in input or output numbers ["def"] = "", -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation") ["h"] = "on", -- abbr=on + use "h" for hand unit (default) ["hh"] = "opt_hand_hh", -- abbr=on + use "hh" for hand unit ["in"] = "in", -- use symbol for LHS unit ["mos"] = "mos", -- in a range, repeat the input unit (no longer used) ["none"] = "off", -- old name for "off" ["off"] = "off", -- use name for all units ["on"] = "on", -- use symbol for all units ["out"] = "out", -- use symbol for RHS unit (default) ["values"] = "opt_values", -- show only input and output numbers, not units ["~"] = "opt_also_symbol", -- show input unit symbol as well as name }, ["adj"] = { ["1"] = "opt_singular", -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1) ["flip"] = "opt_flip?", -- reverse order of input/output ["j"] = "opt_use_nbsp", -- "join": use " " instead of " " between value and unit name ["mid"] = "opt_adjectival, opt_adj_mid", -- adj=on with user-specified text after input unit (between input and output) ["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers ["off"] = "", -- ignored (off is the default) ["on"] = "opt_adjectival", -- unit name is singular and hyphenated ["pre"] = "opt_one_preunit", -- user-specified text before input unit ["ri0"] = "opt_ri=0", -- round input with precision = 0 ["ri1"] = "opt_ri=1", -- round input with precision = 1 ["ri2"] = "opt_ri=2", -- round input with precision = 2 ["ri3"] = "opt_ri=3", -- round input with precision = 3 }, ["comma"] = { ["5"] = "opt_comma5", -- only use numsep grouping if 5 or more digits ["gaps"] = "opt_gaps", -- use gaps, not numsep, to separate groups of digits ["gaps3"] = "opt_gaps, opt_gaps3", -- group only in threes rather than default of no gap before a single digit after decimal mark ["gaps5"] = "opt_gaps?", -- deprecated 2015-05-29, was: opt_gaps + opt_comma5 ["off"] = "opt_nocomma", -- no numsep in input or output numbers }, ["debug"] = { ["yes"] = "opt_sortable_debug", -- make the normally hidden sort key visible }, ["disp"] = { ["/"] = "or?", -- see "slash" ["2"] = "opt_output_only?", -- display only output value and symbol/name (not input) ["5"] = "opt_round=5", -- round output value to nearest 5 ["b"] = "b", -- join: '(...)' ["(or)"] = "(or)", -- join: '(...)' with 'or' between outputs in a combination ["br"] = "br", -- join: '<br />' ["br()"] = "br()", -- join: '<br />(...)' ["comma"] = "comma", -- join: ',' ["flip"] = "opt_flip", -- reverse order of input/output ["flip5"] = "opt_flip, opt_round=5?", -- disp=flip + disp=5 ["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers ["number"] = "opt_output_number_only", -- display output value (not input, and not output symbol/name) ["or"] = "or", -- join: 'or' ["out"] = "opt_output_only", ["output number only"] = "opt_output_number_only", ["output only"] = "opt_output_only", ["preunit"] = "opt_two_preunits", -- user-specified text before input and output units ["s"] = "or?", -- see "slash" ["slash"] = "or?", -- 2014-11-03: "disp=slash" is now equivalent to "disp=or" as slash is unhelpful ["sqbr"] = "sqbr", -- join: '[...]' ["table"] = "opt_table", -- output is suitable for a table cell with align="right" ["tablecen"] = "opt_tablecen", -- output is suitable for a table cell with align="center" ["u2"] = "opt_output_unit_only?", -- display output symbol/name (not input, and not output value) ["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value) ["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known ["unit2"] = "opt_output_unit_only", ["x"] = "x", -- join: <first>...<second> (user-specified text) }, -- frac=x is handled as a special case: x must be an integer (possibly in local language) = 2 or more ["lang"] = { -- language for output digits (both en and local digits are always accepted for input) ["en"] = "opt_lang_en", -- use en digits for numbers, regardless of local language ["local"] = "opt_lang_local", -- use local digits for numbers (default, although config can change default to en) }, ["lk"] = { ["입력"] = "in", -- link LHS unit name or symbol ["해제"] = "off", -- 링크를 걸지 않음: same as default except for hand unit ["모두"] = "on", -- link all unit names or symbols (but not twice for the same unit) ["출력"] = "out", -- link RHS unit name or symbol ["in"] = "in", -- link LHS unit name or symbol ["off"] = "off", -- do not link: same as default except for hand unit ["on"] = "on", -- link all unit names or symbols (but not twice for the same unit) ["out"] = "out", -- link RHS unit name or symbol }, ["near"] = { ["5"] = "opt_round=5?", -- round output value to nearest 5 }, ["order"] = { ["flip"] = "opt_flip", -- reverse order of input/output }, ["round"] = { ["0.5"] = "opt_round=0.5", -- round output value to nearest 0.5 ["5"] = "opt_round=5", -- round output value to nearest 5 ["10"] = "opt_round=10", -- round output value to nearest 10 (same as but clearer than "|-1") ["25"] = "opt_round=25", -- round output value to nearest 25 ["50"] = "opt_round=50", -- round output value to nearest 50 ["each"] = "opt_round_each", -- using default precision in a range, round each output separately (default uses highest precision of each item in range) }, -- sigfig=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more ["sortable"] = { ["off"] = "", -- ignored (off is the default) ["in"] = "opt_sortable_on?", -- same as "on" ["on"] = "opt_sortable_on", -- output sort key for use in a sortable table, based on value from converting to a standard base unit ["out"] = "opt_sortable_on?", -- same as "on" }, ["sp"] = { ["us"] = "opt_sp_us", -- use U.S. spelling (like "meter" instead of default "metre") }, ["spell"] = { -- only English spelling is supported; not scientific notation; only some fractions ["in"] = "opt_spell_in", -- spell input value in words ["In"] = "opt_spell_in, opt_spell_upper", -- spell input value in words with first letter uppercase ["on"] = "opt_spell_in, opt_spell_out", -- spell input and output values in words ["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase }, -- stylein=x is handled as a special case: x can be any text -- styleout=x is handled as a special case: x can be any text } return { SIprefixes = SIprefixes, all_categories = all_categories, all_messages = all_messages, currency = { ['$'] = true, ['£'] = true, ['₩'] = true, ['¥'] = true, ['원'] = true, ['엔'] = true, ['위안'] = true, ['달러'] = true, ['파운드'] = true }, currency_strings = { ['원'] = '₩', ['엔'] = '¥', ['위안'] = '¥', ['달러'] = '$', ['파운드'] = '£' }, -- for kowiki customary_units = customary_units, disp_joins = disp_joins, en_option_name = en_option_name, en_option_value = en_option_value, eng_scales = eng_scales, ranges = ranges, translation_table = translation_table, }
이 문서에서 사용한 틀:
모듈:Convert/text/설명문서
(
원본 보기
)
모듈:Convert/text
문서로 돌아갑니다.
다른 언어